Evaluation of Temperature Effect on Kernel Silo Dryer Towards Kernel Moisture Content at PT PQZ
DOI:
https://doi.org/10.30872/cmg.v9i2.23164Abstract
This study aims to evaluate the effect of temperature on the Kernel Silo Dryer toward the moisture content of palm kernels at PT XYZ. Moisture control in palm kernels is crucial to ensuring optimal crude palm kernel oil (CPKO) quality. The drying process using a Kernel Silo Dryer was conducted at varying temperatures of 40°C, 50°C, and 60°C for three hours. Results indicated that higher drying temperatures resulted in lower kernel moisture content. At 60°C, the kernel moisture content reached the desired standard below 7%. However, at 40°C and 50°C, the moisture content exceeded the specified limit, increasing the risk of mould growth and reducing kernel quality. Key factors influencing drying efficiency include heater condition, steam pressure from the Back Pressure Vessel (BPV), and equipment cleanliness. Therefore, temperature optimisation and proper maintenance are essential to improve drying efficiency and maintain kernel quality.
References
Akowuah, J.O. et al. (2018) “Drying Temperature Effect on Kernel Damage and Viability of Maize Dried in a Solar Biomass Hybrid Dryer,” Open Journal of Applied Sciences, 08(11), pp. 506–517. Available at: https://doi.org/10.4236/ojapps.2018.811041.
Babalola, M.T. and Ajagunna, A.O. (2004) “Design and Performance Characteristics of A Palm Kernel Nuts Drier,” Nig. J of Pure & Appl. Physics, 3, pp. 8–14.
Charmongkolpradit, S. et al. (2021) “Influence of drying temperature on anthocyanin and moisture contents in purple waxy corn kernel using a tunnel dryer,” Case Studies in Thermal Engineering, 25. Available at: https://doi.org/10.1016/j.csite.2021.100886.
Goswami, A., Pillai, S.C. and McGranaghan, G. (2023) “Micro/Nanoscale surface modifications to combat heat exchanger fouling,” Chemical Engineering Journal Advances. Elsevier B.V. Available at: https://doi.org/10.1016/j.ceja.2023.100519.
Habibiasr, M. (2019) Effects of Drying on The Physical and Chemical Properties of Palm Kernels . Universiti Putra Malaysia. Available at: Koyuncu et al. “Drying Kinetics of Grape Concentrate in a spouted bed dryer”. Drying Tecnology, Volume 24 (12), 2006, pages 1629-1636 (Accessed: October 14, 2025).
Inamdar, H. V. et al. (2023) “Air-side fouling of finned heat exchangers: Part 1, review and proposed test protocol,” International Journal of Refrigeration. Elsevier Ltd, pp. 77–86. Available at: https://doi.org/10.1016/j.ijrefrig.2023.02.017.
Kraiem, A. et al. (2023) “Experimental Analysis of Drying Conditions’ Effect on the Drying Kinetics and Moisture Desorption Isotherms at Several Temperatures on Food Materials: Corn Case Study,” Processes, 11(1). Available at: https://doi.org/10.3390/pr11010184.
Ministry of Agriculture (2024) “OUTLOOK KELAPA SAWIT 2024,” Pusat Data dan Sistem Informasi Pertanian Sekretariat Jenderal-Kementerian Pertanian, 1(1), pp. 1–61.
Unnikrishnan, A. and Mulky, L. (2023) “Overview of Fouling – An Industrial Jeopardy,” ChemBioEng Reviews. John Wiley and Sons Inc, pp. 597–610. Available at: https://doi.org/10.1002/cben.202200012.
Yahya, A.K. et al. (2023) “EVALUASI KINERJA PLATE HEAT EXCHANGER DI REFINERY PLANT INDUSTRI MINYAK GORENG,” SAINTI: Majalah Ilmiah Teknologi Industri, 20(1), p. 1. Available at: https://doi.org/10.52759/sainti.v20i1.203.
Zakwan et al. (2024) “THE EFFECT OF HEATING TEMPERATURE AT THE SILO DRYER KERNEL STATION ON THE QUALITY OF THE KERNELS IN THE COCONUT FACTORY PALM PT. XYZ,” Agro Fabrica, 6(1), pp. 37–44. Available at: https://www.ejurnal.itsi.ac.id/index.php/JAF.
Downloads
Published
Issue
Section
License
Licensed Use of Non - Commercial Articles will be governed by the Creative Commons Attribution license, which is featured on the Creative Commons Attribution 4.0 International License.
The author guarantees that the articles published through JURNAL CHEMURGY are original and do not contain statements that violate the law do not violate others' rights are subject to copyright, which is held exclusively by the author and free from the rights of third parties. The author is allowed to quote from various sources used for research and not to harm any party.
JURNAL CHEMURGY disseminates articles published with the rules set by Creative Commons. JURNAL CHEMURGY license allows users to copy, distribute, display, and work for non-commercial purposes. Users also need to connect authors and JURNAL CHEMURGY with the distribution of articles in journals.
The Author rights, namely copyrights, ownership rights, patents, rights to use the substance of articles in the future, rights to reproduce articles for personal purposes and not to be traded, rights to conduct personal archives, rights to contract used for the non-exclusive distribution of articles published in the form a book and acknowledge the initial publication of the article originating from JURNAL CHEMURGY.
Suppose articles published by the author through JURNAL CHEMURGY are compiled with other authors. In that case, it is necessary to create a form containing the authority of all authors involved in the article's production by including the agreement agreed upon by all authors in the article.
The next point is, the agreement can be terminated if the author or JURNAL CHEMURGY violates the agreement and cannot make repairs to the customer within a maximum of 2 months after being given information asking for the violation to be corrected. If there is no violation of the agreement, the license will automatically terminate and affect JURNAL CHEMURGY.
Regarding royalties, so far, if it is following applicable legal regulations, the author will waive his right to collect royalties on articles that have been licensed by JURNAL CHEMURGY.
In publishing the article, the editorial process is successful. JURNAL CHEMURGY will continue it. JURNAL CHEMURGY has the right to adjust articles related to punctuation, spelling, capital letters, references used, and usage adapted to JURNAL CHEMURGY. The author acknowledges that the article can be published and accessed free of charge by the public.
