Prototipe Sistem Penyiram Tanaman Otomatis dengan Sensor Soil Moisture Dan Sensor DHT11

Authors

DOI:

https://doi.org/10.30872/electrops.v1i1.9373

Keywords:

Prototipe, Otomatis, Sensor Soil Moisture, Sensor DHT11

Abstract

Perkembangan ilmu pengetahuan dan teknologi telah mengalami perubahan yang begitu pesat diberbagai bidang, begitupun dengan bidang pertanian. Setiap peralatan dalam bidang pertanian pun juga mengalami berbagai perkembangan yang begitu signifikan. Peralatan-peralatan tersebut didorong untuk dapat bekerja secara otomatis. Salah satu peralatan yang dikembangkan secara otomatis adalah alat penyiraman. Prototipe sistem penyiram tanaman otomatis ini menggunakan sensor soil moisture sebagai pembaca kelembaban tanah pada suatu tanaman. Ketika sensor soil moisture ini membaca nilai kelembaban tanah di bawah 500 maka secara otomatis keran air akan hidup dan tanaman tersebut akan tersiram secara otomatis. Ketika pembacaan sensor tersebut berada di atas 500 maka secara otomatis keran air akan mati. Prototipe ini juga dapar dimonitoring suhu dan kelembaban udara tanaman dengan Sensor DHT11 yang akan terlihat pada layar LCD. Dengan adanya penelitian ini, setidaknya dapat membantu para pemilik tanaman untuk meringankan pekerjaannya dan mendapatkan hasil yang memuaskan.

References

A. Fatchiya, S. Amanah, and Y. I. Kusumastuti, “Penerapan Inovasi Teknologi Pertanian dan Hubungannya dengan Ketahanan Pangan Rumah Tangga Petani,” Jurnal Penyuluhan, vol. 12, no. 2, p. 190, Oct. 2016.

S. K. An, H. B. Lee, J. Kim, and K. S. Kim, “Efficient Water Management for Cymbidium Grown in Coir Dust Using a Soil Moisture Sensor-Based Automated Irrigation System,” Agronomy, vol. 11, no. 1, p. 41, Dec. 2020.

A. R. Putri, M. Iqbal, A. Suprapto, “Rancang Bangun Model Rumah Kaca Terkendali untuk Tanaman Cabe dengan Media Pemberitahuan Melalui Twitter,” e-Proceeding of Applied Science, vol. 1, no. 1, pp. 906–914, Apr. 2015.

A. Abdullah, S. Hardhienata, and A. Chairunnas, “Model Pengaturan Suhu Dan Kelembaban Pada Ruang Jamur Tiram Menggunakan Sensor Dht11 Dan Mikrokontroler,” J. Artic, vol. 2, 2012.

Y. Zhou, Q. Zhou, Q. Kong, and W. Cai, “Wireless temperature, humidity monitor and control system,” in 2012 2nd International Conference on Consumer Electronics, Communications and Networks (CECNet), pp. 2246–2250, Apr 2012.

A. Amarudin, D. A. Saputra, and R. Rubiyah, “Rancang Bangun Alat Pemberi Pakan Ikan Menggunakan Mikrokontroler,” Jurnal Ilmiah Mahasiswa Kendali dan Listrik, vol. 1, no. 1, pp. 7–13, Jul. 2020.

S. N. Kothawade, S. M. Furkhan, A. Raoof, and K. S. Mhaske, “Efficient Water Management for Greenland using Soil Moisture Sensor,” in 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), Jul. 2016.

A. Firmansyah, Perancangan Smart Parking System Berbasis Arduino Uno,” SIGMA - Jurnal Teknologi Pelita Bangsa, vol. 10, no. 1, Sep. 2019.

M. C. Anwar, D. Andika, M. Walid, Hozairi, “Smart Home Menggunakan Perintah Suara Dan Sensor LDR Berbasis Arduino Dan Android,” in Seminar Nasional Humaniora & Aplikasi Teknologi Informasi 2017 (SEHATI 2017), pp. 28-33, Oct. 2017.

Downloads

Published

2022-12-27

Issue

Vol. 1 No. 1 (2022): ELECTROPS : Jurnal Ilmiah Teknik Elektro

Section

Articles

License

The copyright of this article is transferred to ELECTROPS : Jurnal Ilmiah Teknik Elektro and when the article is accepted for publication. the authors transfer all and all rights into and to paper including but not limited to all copyrights in the ELECTROPS : Jurnal Ilmiah Teknik Elektro. The author represents and warrants that the original is the original and that he/she is the author of this paper unless the material is clearly identified as the original source, with notification of the permission of the copyright owner if necessary. The author states that he has the authority and authority to make and carry out this task.
The author states that:

  1. This paper has not been published in the same form elsewhere.
  2. This will not be submitted elsewhere for publication prior to acceptance/rejection by this Journal.

A Copyright permission is obtained for material published elsewhere and who require permission for this reproduction. Furthermore, I / We hereby transfer the unlimited publication rights of the above paper to ELECTROPS : Jurnal Ilmiah Teknik Elektro. Copyright transfer includes exclusive rights to reproduce and distribute articles, including reprints, translations, photographic reproductions, microforms, electronic forms (offline, online), or other similar reproductions.

The author's mark is appropriate for and accepts responsibility for releasing this material on behalf of any and all coauthor. This Agreement shall be signed by at least one author who has obtained the consent of the co-author (s) if applicable. After the submission of this agreement is signed by the author concerned, the amendment of the author or in the order of the author listed shall not be accepted.

Rights / Terms and Conditions Saved

  1. The author keeps all proprietary rights in every process, procedure, or article creation described in Work.
  2. The author may reproduce or permit others to reproduce the work or derivative works for the author's personal use or for the use of the company, provided that the source and the Informatika Mulawarman copyright notice are indicated, the copy is not used in any way implying the ELECTROPS : Jurnal Ilmiah Teknik Elektro approval of the product or service from any company, and the copy itself is not offered for sale.
  3. Although authors are permitted to reuse all or part of the Works in other works, this does not include granting third-party requests to reprint, republish, or other types of reuse.