Desain Sistem Pengolaha Tepung MOCAF (Modified Cassava) Menggunakan Software PLC OMRON

Authors

DOI:

https://doi.org/10.30872/electrops.v3i1.18555

Abstract

This research aims to design and develop a Mocaf (Modified Cassava Flour) processing system based on automation using Omron PLC software. Mocaf flour is a cassava-derived product whose processing involves fermentation, drying, and milling stages. The designed system focuses on improving production efficiency, maintaining product quality, and minimizing errors caused by human factors. The research method includes system requirements analysis, hardware and software design, as well as implementation and testing on a prototype. The Omron PLC serves as the main controller, integrating various sensors and actuators to monitor and control the processes automatically. The system is also equipped with a user interface to facilitate process monitoring and parameter settings. The results indicate that the designed system can optimize the Mocaf flour production process with high precision and reliability. Additionally, the use of Omron PLC-based automation has proven effective in reducing processing time and increasing productivity. This research is expected to contribute to the development of a more modern and efficient local food industry.

References

S. D. C. Steffi S. C. Saragih, “ANALISIS NILAI TAMBAH DAN STRATEGI PENGEMBANGAN PENGOLAHAN UBI KAYU MENJADI TEPUNG MOCAF (MODIFIED CASSAVA FLOUR),” p. 3.

A. J. S. F. Alfin Hadistio, “Tepung Mocaf (Modified Cassava Flour) Untuk Ketahanan Pangan Indonesia,” Jurnal Pangan Halal, vol. 1, no. 1, pp. 13-14, April 2019.

M. A. A. T. U. P. P. Z. N. Yuni Elmita Sari, “Pengaruh Faktor Produksi Terhadap Pendapatan Usahatani Singkong di Desa Bandar Putih Kabupaten Lampung Utara,” Agriculture and Animal Science, vol. 4, no. 2, p. 99, 31 Oktober 2024.

B. P. Gede Satmika, “Kualitas Wingko dengan Bahan Tepung Mocaf,” PARIS (Jurnal Pariwisata dan Bisnis), vol. 02, no. 11, p. 2423, November 2023.

D. I. Daimul Wafa, “Rancang Bangun Sistem Monitoring Area Packaging di PT Garam (PERSERO) Berbasis Outseal - Haiwell,” Jurnal Cahaya Mandalika, vol. 3, no. 2, p. 697, 21 Juni 2023.

A. D. S. H. A. Hakam Ali, “Prototype Sistem Control Konveyor Mesin Cuci Mobil Otomatis Berbasis PLC (Programmable Logic Controller),” Jurnal Cahaya Mandalika, vol. 4, no. 2, p. 1366, 01 Juli 2024.

J. R. Azhar, “Desain Plant Instrumentasi Industri Berbasis SCADA,” Proceeding Seminar Nasional Politeknik Negeri Lhokseumawe, vol. 3, no. 1, pp. A283 - A286, 1 OKtober1 2019.

K. S. R. J. A. H. A. Y. R. Joko Purwanto, “Design and Development of Automation System for Measuremenet of Flow Nozzle Robot Spray Based on Programmable Logic Controller and Human Machine INterface at PT ADM Casting Plant,” SYSTEMATICS, vol. 02, no. 02, pp. 59 - 60, Agustus 2020.

Downloads

Published

2024-06-27

Issue

Vol. 3 No. 1 (2024): ELECTROPS : Jurnal Ilmiah Teknik Elektro

Section

Articles

License

The copyright of this article is transferred to ELECTROPS : Jurnal Ilmiah Teknik Elektro and when the article is accepted for publication. the authors transfer all and all rights into and to paper including but not limited to all copyrights in the ELECTROPS : Jurnal Ilmiah Teknik Elektro. The author represents and warrants that the original is the original and that he/she is the author of this paper unless the material is clearly identified as the original source, with notification of the permission of the copyright owner if necessary. The author states that he has the authority and authority to make and carry out this task.
The author states that:

  1. This paper has not been published in the same form elsewhere.
  2. This will not be submitted elsewhere for publication prior to acceptance/rejection by this Journal.

A Copyright permission is obtained for material published elsewhere and who require permission for this reproduction. Furthermore, I / We hereby transfer the unlimited publication rights of the above paper to ELECTROPS : Jurnal Ilmiah Teknik Elektro. Copyright transfer includes exclusive rights to reproduce and distribute articles, including reprints, translations, photographic reproductions, microforms, electronic forms (offline, online), or other similar reproductions.

The author's mark is appropriate for and accepts responsibility for releasing this material on behalf of any and all coauthor. This Agreement shall be signed by at least one author who has obtained the consent of the co-author (s) if applicable. After the submission of this agreement is signed by the author concerned, the amendment of the author or in the order of the author listed shall not be accepted.

Rights / Terms and Conditions Saved

  1. The author keeps all proprietary rights in every process, procedure, or article creation described in Work.
  2. The author may reproduce or permit others to reproduce the work or derivative works for the author's personal use or for the use of the company, provided that the source and the Informatika Mulawarman copyright notice are indicated, the copy is not used in any way implying the ELECTROPS : Jurnal Ilmiah Teknik Elektro approval of the product or service from any company, and the copy itself is not offered for sale.
  3. Although authors are permitted to reuse all or part of the Works in other works, this does not include granting third-party requests to reprint, republish, or other types of reuse.