RANCANG BANGUN ALAT MONITORING AIR KOLAM IKAN NILA BERBASIS ARDUINO DENGAN SUMBER DAYA PANEL SURYA

Authors

DOI:

https://doi.org/10.30872/electrops.v3i2.17557

Abstract

Budidaya ikan nila (Oreochromis niloticus) merupakan sektor penting dalam industri perikanan, tidak hanya di Indonesia, tetapi juga di berbagai negara. Keberhasilan dalam budidaya ikan nila sangat bergantung pada kondisi lingkungan kolam, terutama kualitas air.  Ketersedian air dan kualitas air merupakan salah satu sektor yang menentuka keberhasilan budidaya ikan nila, kualitas air yang kurang baik dapat berefek pada pertumbuhan ikan nila. Dalamupaya meningkatkan efisiensi dan keberlanjutan dalam budidaya ikan nila, penelitian ini bertujuan untuk merancang dan membangun alat monitoring air dan otomasi pengisian air kolam ikan nila berbasis Arduino yang menggunakan sumber daya dari panel surya. Alat ini dilengkapi dengan sensor untuk memantau parameter kualitas air seperti pH, dan suhu serta sistem otomasi untuk mengontrol pengisian air kolam secara otomatis berdasarkan data yang diterima. Hasil pengujian menunjukkan rata-rata error pada masing-masing sensor, yaitu 3% untuk sensor ultrasonik pada pengukuran ketinggian air, 0,79% untuk sensor suhu, serta 4,94% untuk sensor pH. Dengan sumber energi dari panel surya, alat ini mampu memantau kondisi kolam secara berkelanjutan tanpa memerlukan listrik dari PLN secara terus-menerus, sehingga dapat membantu peternak dalam menjaga kualitas air kolam dengan lebih praktis dan mandiri. Dengan desain yang praktis dan akurat, alat ini memberikan solusi pemantauan yang berkelanjutan untuk mendukung kelancaran budidaya ikan nila.

References

R. N. Rohmah and R. Jeprianto, “Monitoring dan Controlling Kadar pH Pada Air Kolam Ikan dengan Menggunakan Aplikasi Blynk Berbasis Esp Node Mcu,” Jurnal Teknik Elektro, vol. 21, no. 2, pp. 95–102, Sep. 2021.

P. Hutabalian, D. Setiawan, and M. Yetri, “Rancang Bangun Sistem Ganti Air Kolam Ikan Otomatis Menggunakan RTC Berbasis Mikrokontroler Atmega 16A,” Jurnal Sistem Komputer TGD, vol. 2, pp. 163–168, 2023, [Online]. Available: https://ojs.trigunadharma.ac.id/index.php/jskom

H. A. Harahap, “Rancang Bangun Sistem Kontrol Kolam Ikan Nila Berbasis Out Seal PlC,” Jurnal UNITECH, vol. 2, no. 1, pp. 1–10, 2023.

N. Sholikin, A. Rozaq, M. Iqbal, N. Yulita, and D. Setyaningsih, “Kontrol Kadar pH dan Ketinggian Air pada Kolam Ikan Nila Berbasis IoT,” Jurnal ELKON, vol. 01, pp. 1–8, Dec. 2021.

L. Sampebatu and A. Kamolan, “Rancang Bangun Sistem Otomatisasi dan Telekontrol Pada Pengondisian Air Kolam Pembibitan Ikan Nila,” Jurnal Ampere, vol. 6, no. 1, pp. 32–42, Jun. 2021, doi: 10.31851/ampere.

R. Pramana, “Perancangan Sistem Control Dan Monitoring Kualitas Air Dan Suhu Air Pada Kolam Bududaya Ikan,” Jurnal Sustainable, vol. 07, no. 01, pp. 13–23, 2018.

M. F. Soambaton, D. Djuniadi, and A. H. Al-Azhari, “Monitoring Kolam Ikan Nila Berbasis IoT dengan Sensor Amonia, Suhu, Ketinggian, dan PH,” Jurnal Informatika dan Teknik Elektro Terapan, vol. 12, no. 2, pp. 919–926, Apr. 2024, doi: 10.23960/jitet.v12i2.4021.

M. R. Nur et al., “Sistem Pakan Tertakar Otomatis untuk Budidaya Ikan Nila Merah Berbasis IoT,” Journal of Internet and Software Engineering, vol. 1, no. 4, pp. 1–9, Jun. 2024, doi: 10.47134/pjise.v1i4.2779.

H. R. Syamsi, B. Darmawan, and D. F. Budiman, “Rancang Bangun Sistem Monitoring Suhu Air Pada Kolam Pembesaran Ikan Nila Berbasis IoT,” Journal of Information System Research, vol. 6, no. 1, pp. 469–477, 2024, doi: 10.47065/josh.v6i1.6097.

S. Suriana, A. P. Lubis, and E. Rahayu, “Sistem Monitoring Jarak Jauh Pada Suhu Kolam Ikan Nila Bangkok Memanfaatkan Internet of Things (IOT) Berbasis NODEMCUESP8266,” JUTSI (Jurnal Teknologi dan Sistem Informasi), vol. 1, no. 1, pp. 1–8, Sep. 2021, doi: 10.33330/jutsi.v1i1.1004.

Downloads

Published

2024-11-24

Issue

Vol. 3 No. 2 (2024): ELECTROPS : Jurnal Ilmiah Teknik Elektro

Section

Articles

License

The copyright of this article is transferred to ELECTROPS : Jurnal Ilmiah Teknik Elektro and when the article is accepted for publication. the authors transfer all and all rights into and to paper including but not limited to all copyrights in the ELECTROPS : Jurnal Ilmiah Teknik Elektro. The author represents and warrants that the original is the original and that he/she is the author of this paper unless the material is clearly identified as the original source, with notification of the permission of the copyright owner if necessary. The author states that he has the authority and authority to make and carry out this task.
The author states that:

  1. This paper has not been published in the same form elsewhere.
  2. This will not be submitted elsewhere for publication prior to acceptance/rejection by this Journal.

A Copyright permission is obtained for material published elsewhere and who require permission for this reproduction. Furthermore, I / We hereby transfer the unlimited publication rights of the above paper to ELECTROPS : Jurnal Ilmiah Teknik Elektro. Copyright transfer includes exclusive rights to reproduce and distribute articles, including reprints, translations, photographic reproductions, microforms, electronic forms (offline, online), or other similar reproductions.

The author's mark is appropriate for and accepts responsibility for releasing this material on behalf of any and all coauthor. This Agreement shall be signed by at least one author who has obtained the consent of the co-author (s) if applicable. After the submission of this agreement is signed by the author concerned, the amendment of the author or in the order of the author listed shall not be accepted.

Rights / Terms and Conditions Saved

  1. The author keeps all proprietary rights in every process, procedure, or article creation described in Work.
  2. The author may reproduce or permit others to reproduce the work or derivative works for the author's personal use or for the use of the company, provided that the source and the Informatika Mulawarman copyright notice are indicated, the copy is not used in any way implying the ELECTROPS : Jurnal Ilmiah Teknik Elektro approval of the product or service from any company, and the copy itself is not offered for sale.
  3. Although authors are permitted to reuse all or part of the Works in other works, this does not include granting third-party requests to reprint, republish, or other types of reuse.