Sistem Monitoring Suhu secara Real-Time berbasis Arduino Uno untuk Pemantauan Lingkungan

Authors

DOI:

https://doi.org/10.30872/electrops.v3i1.15789

Keywords:

Arduino Uno, monitoring suhu, RTC DS3231, Display OLED, real-time, pemantauan lingkungan

Abstract

Pada penelitian ini, dikembangkan sebuah sistem monitoring suhu lingkungan berbasis Arduino Uno yang dilengkapi dengan modul Real-Time Clock (RTC) DS3231. Tujuan utama dari sistem ini adalah untuk mengukur, mencatat, dan menampilkan data suhu lingkungan secara real-time dengan akurasi tinggi. Arduino Uno berfungsi sebagai pengendali utama yang mengintegrasikan sensor suhu DS18B20 untuk pengukuran suhu dan RTC DS3231 untuk penyediaan waktu yang akurat. Data suhu yang diperoleh dari sensor kemudian disimpan bersama dengan stempel waktu dari RTC dalam kartu SD, sehingga memungkinkan analisis data historis secara komprehensif. Hasil pengujian menunjukkan bahwa sistem ini mampu mengukur suhu dengan akurasi yang baik dan dapat beroperasi secara kontinu dalam jangka waktu yang lama. Implementasi sistem ini menawarkan solusi yang efektif dan ekonomis untuk pemantauan suhu lingkungan secara real-time, dengan potensi untuk pengembangan lebih lanjut menjadi sistem yang lebih kompleks atau terintegrasi dengan jaringan IoT (Internet of Things).

References

A. Silfiyana Rohman, U. Nurbaiti, and Fianti, “Analisis Kenyamanan Suhu Ruang,” J. Enviro Sci., vol. 17, no. 1, pp. 1–6, 2021.

T. B. W. Hartono, “Physiological Responses of Workers’ Vital Signs in High Temperature Environments at The Tofu Home Industry Kedung Tarukan Surabaya,” J. Kesehat. Lingkung., vol. 11, no. 3, pp. 242–251, 2019, doi: 10.20473/jkl.v11i3.2019.242-251.

F. Vinola and A. Rakhman, “Sistem Monitoring dan Controlling Suhu Ruangan Berbasis Internet of Things,” J. Tek. elektro dan Komput., vol. 9, no. 2, pp. 117–126, 2020.

Y. Fathulrohman and A. Saepuloh, “Alat monitoring suhu dan kelembapan menggunakan arduino uno,” J. Manaj. dan Tek. Inform. STMIK DCI, vol. 02, no. 01, pp. 161–171, 2018.

A. Abdurrazaq et al., “Alat Ukur Suhu Udara Digital Berbasis Atmega 32,” J. Ilmu Komput. dan Teknol. Inf., vol. 03, no. 01, 2019.

H. I. Islam et al., “Sistem Kendali Suhu Dan Pemantauan Kelembaban Udara Ruangan Berbasis Arduino Uno Dengan Menggunakan Sensor Dht22 Dan Passive Infrared (Pir),” no. June 2017, pp. SNF2016-CIP-119-SNF2016-CIP-124, 2016, doi: 10.21009/0305020123.

R. M. Abdurrohman, “Prototipe Monitoring Suhu Dan Kelembapan Secara Realtime,” J. ICTEE, vol. 4, no. 2, p. 29, 2023, doi: 10.33365/jictee.v4i2.3158.

R. S. V. Simbar and A. Syahrin, “Prototype Sistem Pendeteksi Darah Menggunakan Arduino Uno R3,” J. Teknol. Elektro, Univ. Mercu Buana, vol. 8, no. 1, pp. 80–86, 2017.

P. Handoko, “Sistem Kendali Perangkat Elektronika Monolitik Berbasis Arduino Uno R3,” no. November, pp. 1–2, 2017.

P. Rahardjo, “Sistem Penyiraman Otomatis Menggunakan Rtc (Real Time Clock) Berbasis Mikrokontroler Arduino Mega 2560 Pada Tanaman Mangga Harum Manis Buleleng Bali,” J. SPEKTRUM, vol. 8, no. 1, p. 143, 2021, doi: 10.24843/spektrum.2021.v08.i01.p16.

M. R. R. Jusman, S. Masita, and M. Dzarfaraby, “Sistem Kontrol & Monitoring Mesin Penetas Telur Berbasis Iot (Internet Of Things),” Mechatronics J. Prof. Entrep., vol. 3, no. 2, pp. 64–71, 2021.

Y. R. Putra, D. Triyanto, and Suhardi, “Rancang Bangun Perangkat Monitoring Dan Pengaturan Penggunaan Air Pdam ( Perusahaan Daerah Air Minum ) Berbasis Arduino Dengan Antarmuka Website,” J. Coding Sist. Komput. Untan, vol. 05, no. 1, pp. 33–34, 2017, [Online]. Available: http://jurnal.untan.ac.id/index.php/jcskommipa/article/download/19172/16025

A. B. Pulungan and D. S. Goci, “Penggunaan Sistem Data logger Dalam Pencatatan Data Parameter Panel Surya berbasis Mikrokontroler,” JTEV (Jurnal Tek. Elektro dan Vokasional), vol. 7, no. 2, p. 337, 2021, doi: 10.24036/jtev.v7i2.115052.

A. M. Ijeaku, M. H. Chidubem, E. Kelechi, and N. U. Obioma, “American Journal of Engineering Research ( AJER ) ORGANIC LIGHT EMITTING DIODE ( OLED ) American Journal of Engineering Research ( AJER ),” no. 9, pp. 153–159, 2015.

L. B. Setyawan, “Prinsip Kerja dan Teknologi OLED,” Techné J. Ilm. Elektrotek., vol. 16, no. 02, pp. 121–132, 2017, doi: 10.31358/techne.v16i02.165.

W. A. K. Muslimin and S. Winardi, “Rancang Bangun Alat Ukur Tinggi Badan Dengan Display Oled Dan Bersuara Berbasis Arduino Uno,” J. Ris. Sist. Inf., 2021, [Online]. Available: http://skripsi.narotama.ac.id/files/RANCANG BANGUN ALAT UKUR TINGGI BADAN DENGAN DISPLAY OLED DAN BERSUARA BERBASIS ARDUINO UNO .pdf

* Saniman, M. Ramadhan, and I. Zulkarnain, “J-SISKO TECH Jurnal Teknologi Sistem Informasi dan Sistem Komputer TGD Rancang Bangun Smart Glass Telemetri Tegangan Menggunakan Teknik Simplex Berbasis Arduino Nano,” , vol. 12, no. 1, pp. 12–18, 2020.

H. Suryantoro, “Prototipe Dehumidifier untuk Monitoring Kelembaban Laboratorium Biomedis Menggunakan Sensor DHT22 dan Peltier TEC1-12706 Berbasis Arduino,” Indones. J. Lab., vol. 4887, no. 3, p. 79, 2023, doi: 10.22146/ijl.v0i3.88033.

Y. Yunidar, Y. Yaskur, R. Roslidar, and M. Syaryadhi, “Rancang Bangun Alat Pengukur Jarak Tempuh Lari Laun Menggunakan Sensor Inertial Measurement Unit (IMU) Berbasis Mikrokontroler,” J. Rekayasa Elektr., vol. 18, no. 1, pp. 13–19, 2022, doi: 10.17529/jre.v18i1.22973.

M. I. Hakiki, U. Darusalam, and N. D. Nathasia, “Konfigurasi Arduino IDE Untuk Monitoring Pendeteksi Suhu dan Kelembapan Pada Ruang Data Center Menggunakan Sensor DHT11,” J. Media Inform. Budidarma, vol. 4, no. 1, p. 150, 2020, doi: 10.30865/mib.v4i1.1876.

Downloads

Published

2024-11-24

Issue

Vol. 3 No. 1 (2024): ELECTROPS : Jurnal Ilmiah Teknik Elektro

Section

Articles

License

The copyright of this article is transferred to ELECTROPS : Jurnal Ilmiah Teknik Elektro and when the article is accepted for publication. the authors transfer all and all rights into and to paper including but not limited to all copyrights in the ELECTROPS : Jurnal Ilmiah Teknik Elektro. The author represents and warrants that the original is the original and that he/she is the author of this paper unless the material is clearly identified as the original source, with notification of the permission of the copyright owner if necessary. The author states that he has the authority and authority to make and carry out this task.
The author states that:

  1. This paper has not been published in the same form elsewhere.
  2. This will not be submitted elsewhere for publication prior to acceptance/rejection by this Journal.

A Copyright permission is obtained for material published elsewhere and who require permission for this reproduction. Furthermore, I / We hereby transfer the unlimited publication rights of the above paper to ELECTROPS : Jurnal Ilmiah Teknik Elektro. Copyright transfer includes exclusive rights to reproduce and distribute articles, including reprints, translations, photographic reproductions, microforms, electronic forms (offline, online), or other similar reproductions.

The author's mark is appropriate for and accepts responsibility for releasing this material on behalf of any and all coauthor. This Agreement shall be signed by at least one author who has obtained the consent of the co-author (s) if applicable. After the submission of this agreement is signed by the author concerned, the amendment of the author or in the order of the author listed shall not be accepted.

Rights / Terms and Conditions Saved

  1. The author keeps all proprietary rights in every process, procedure, or article creation described in Work.
  2. The author may reproduce or permit others to reproduce the work or derivative works for the author's personal use or for the use of the company, provided that the source and the Informatika Mulawarman copyright notice are indicated, the copy is not used in any way implying the ELECTROPS : Jurnal Ilmiah Teknik Elektro approval of the product or service from any company, and the copy itself is not offered for sale.
  3. Although authors are permitted to reuse all or part of the Works in other works, this does not include granting third-party requests to reprint, republish, or other types of reuse.