Perancangan Kontrol LED Menggunakan Aplikasi Suara
DOI:
https://doi.org/10.30872/electrops.v2i1.14777Keywords:
LED, Kontrol, Aplikasi Smartphone, BluetoothAbstract
Teknologi internet dan smartphone telah berkembang pesat, membuka peluang untuk mengintegrasikan mereka dalam berbagai bidang, termasuk kontrol perangkat elektronik. Artikel ini membahas perancangan prototipe kontrol LED menggunakan aplikasi smartphone. Prototipe memungkinkan pengguna mengontrol LED dari jarak jauh melalui aplikasi smartphone. Sistem terdiri dari perangkat keras dan perangkat lunak. Perangkat keras terdiri dari modul LED, mikrokontroler, dan modul Bluetooth. Perangkat lunak berupa aplikasi smartphone yang terhubung ke mikrokontroler melalui Bluetooth. Aplikasi memungkinkan pengguna memilih lampu ruangan yang hendak dinyalakan. Prototipe diuji dan terbukti berfungsi dengan baik. Hasil penelitian menunjukkan bahwa sistem ini dapat menjadi solusi praktis dan mudah digunakan untuk mengontrol LED dari jarak jauh.References
Pardede, A.M. H., Novriyenni, dan Efendi, S., 2017,Implementasi Pengendalian Lampu Otomatis Berbasis Arduino Menggunakan Metode Fuzzy Logic,Techsi, No. 2, Vol. 9, hal.164–177.
Alisman danWildian, 2018,Rancang Bangun Sistem Kontrol Gorden, Lampu, dan Kipas Angin Berbasis Arduino Uno R3,Jurnal Fisika Unand, No. 3, vol. 7, hal. 279–285.
Kadir, A., 2016,Pengantar Arduino,PT Elex Media Kamputindo, Jakarta.
Sugiyono, 2017, Metode Penelitian dan Pengembangan (Research and Development), Alfabeta, Bandung
Andyka, D., dan Anwar, M. C., 2017, Rancang Bangun Aplikasi Android Pengendalian Smarthome Menggunakan Perintah Suara, Seminar Nasional Humaniora & Aplikasi Teknologi Informasi (SEHATI), hal. 48–51.
Published
Issue
Section
License
The copyright of this article is transferred to ELECTROPS : Jurnal Ilmiah Teknik Elektro and when the article is accepted for publication. the authors transfer all and all rights into and to paper including but not limited to all copyrights in the ELECTROPS : Jurnal Ilmiah Teknik Elektro. The author represents and warrants that the original is the original and that he/she is the author of this paper unless the material is clearly identified as the original source, with notification of the permission of the copyright owner if necessary. The author states that he has the authority and authority to make and carry out this task.
The author states that:
- This paper has not been published in the same form elsewhere.
- This will not be submitted elsewhere for publication prior to acceptance/rejection by this Journal.
A Copyright permission is obtained for material published elsewhere and who require permission for this reproduction. Furthermore, I / We hereby transfer the unlimited publication rights of the above paper to ELECTROPS : Jurnal Ilmiah Teknik Elektro. Copyright transfer includes exclusive rights to reproduce and distribute articles, including reprints, translations, photographic reproductions, microforms, electronic forms (offline, online), or other similar reproductions.
The author's mark is appropriate for and accepts responsibility for releasing this material on behalf of any and all coauthor. This Agreement shall be signed by at least one author who has obtained the consent of the co-author (s) if applicable. After the submission of this agreement is signed by the author concerned, the amendment of the author or in the order of the author listed shall not be accepted.
Rights / Terms and Conditions Saved
- The author keeps all proprietary rights in every process, procedure, or article creation described in Work.
- The author may reproduce or permit others to reproduce the work or derivative works for the author's personal use or for the use of the company, provided that the source and the Informatika Mulawarman copyright notice are indicated, the copy is not used in any way implying the ELECTROPS : Jurnal Ilmiah Teknik Elektro approval of the product or service from any company, and the copy itself is not offered for sale.
- Although authors are permitted to reuse all or part of the Works in other works, this does not include granting third-party requests to reprint, republish, or other types of reuse.