Perancangan Sistem Tempat Sampah Otomatis Menggunakan Arduino

Authors

DOI:

https://doi.org/10.30872/electrops.v2i2.14768

Keywords:

Tempat sampah, arduino nano, Motor Servo

Abstract

Tempat sampah banyak ditemui dengan sistem manual, sehingga membuat orang merasa malas jika hendak membuang sampah karena harus terlebih dahulu membuka tutup tempat sampah. Dari permasalahan tersebut maka dibuatlah Tempat Sampah Pintar yang bisa membuka tutup secara otomatis menggunakan arduino nano sehingga tidak perlu membuka secara lansung tutup sampah. Tujuan penelitian ini adalah untuk menghasilkan sebuah alat yaitu sebuah tempat sampah yang unik dan menarik, dapat membuka dan menutup dengan otomatis jika ada gerakan yang dideteksi. Sehingga diharapkan agar alat tersebut mampu menarik perhatian supaya orang-orang dapat membuang sampah pada tempatnya. Penelitian ini dilakukan berdasarkan hasil analisis pengumpulan data, pengamatan secara langsung system cara kerja alat, wawancara dengan pihak-pihak yang terkait.

References

K. Fatmawati, E. Sabna, and Y. Irawan, “Rancang Bangun Tempat Sampah Pintar Menggunakan Sensor Jarak Berbasis Mikrokontroler Arduino,” Riau Journal Of Computer Science, vol. 6, no. 2, pp. 124–134, 2020.J. Breckling, Ed., The Analysis of Directional Time Series: Applications to Wind Speed and Direction, ser. Lecture Notes in Statistics. Berlin, Germany: Springer, 1989, Vol. 61.

Muliadi, M., Imran, A., & Rasul, M. (n.d.). Pengembangan Tempat sampah Pintar Menggunakan

esp32. Jurnal Media Elektrik. Retrieved May 29, 2022, from

H. Sanjaya, N. K. Daulay, J. Trianto, and R. Andri, “Tempat Sampah Otomatis Berbasis Mikrokontroler Arduino,” JURIKOM (Jurnal Riset Komputer), vol. 9, no. 2, p. 451, 2022, doi: 10.30865/jurikom.v9i2.4058.

S. Herliza and Almasri, “Rancang Bangun Tempat Sampah Pintar sebagai Media Pembelajaran Sekolah,”Jurnal Pendidikan Tambusai, vol. 6, no. 1, pp. 2984–2995, 2022.

J. P. Perdana and T. Wellem, “Perancangan Dan Implementasi Sistem Kontrol Untuk Tempat Sampah Otomatis Menggunakan Arduino Dan Sensor Ultrasonik,” IT-Explore: Jurnal Penerapan Teknologi Informasi dan Komunikasi, vol. 2, no. 2, pp. 104–117, 2023, doi: 10.24246/itexplore.v2i2.2023.pp104-117.

Downloads

Published

2024-02-28

Issue

Vol. 2 No. 2 (2023): ELECTROPS : Jurnal Ilmiah Teknik Elektro

Section

Articles

License

The copyright of this article is transferred to ELECTROPS : Jurnal Ilmiah Teknik Elektro and when the article is accepted for publication. the authors transfer all and all rights into and to paper including but not limited to all copyrights in the ELECTROPS : Jurnal Ilmiah Teknik Elektro. The author represents and warrants that the original is the original and that he/she is the author of this paper unless the material is clearly identified as the original source, with notification of the permission of the copyright owner if necessary. The author states that he has the authority and authority to make and carry out this task.
The author states that:

  1. This paper has not been published in the same form elsewhere.
  2. This will not be submitted elsewhere for publication prior to acceptance/rejection by this Journal.

A Copyright permission is obtained for material published elsewhere and who require permission for this reproduction. Furthermore, I / We hereby transfer the unlimited publication rights of the above paper to ELECTROPS : Jurnal Ilmiah Teknik Elektro. Copyright transfer includes exclusive rights to reproduce and distribute articles, including reprints, translations, photographic reproductions, microforms, electronic forms (offline, online), or other similar reproductions.

The author's mark is appropriate for and accepts responsibility for releasing this material on behalf of any and all coauthor. This Agreement shall be signed by at least one author who has obtained the consent of the co-author (s) if applicable. After the submission of this agreement is signed by the author concerned, the amendment of the author or in the order of the author listed shall not be accepted.

Rights / Terms and Conditions Saved

  1. The author keeps all proprietary rights in every process, procedure, or article creation described in Work.
  2. The author may reproduce or permit others to reproduce the work or derivative works for the author's personal use or for the use of the company, provided that the source and the Informatika Mulawarman copyright notice are indicated, the copy is not used in any way implying the ELECTROPS : Jurnal Ilmiah Teknik Elektro approval of the product or service from any company, and the copy itself is not offered for sale.
  3. Although authors are permitted to reuse all or part of the Works in other works, this does not include granting third-party requests to reprint, republish, or other types of reuse.