SISTEM KENDALI UNTUK MONITORING ALAT BANTU (LIGHT CENTER, CONDESATE TANK AND PUMP) STUDI KASUS : PLTGU TANJUNG BATU KUTAI KARTANEGARA
Abstract
Penggunaan teknologi mikrokontroler dapat dengan mudah mengendalikan peralatan listrik dengan bantuan relay. Relay merupakan salah satu komponen output yang paling sering digunakan baik pada industri, otomotif, ataupun peralatan elektronika lainnya. Pembuatan aplikasi controling dan monitoring alat bantu (Light Center, Condesate Tank and Pump Studi Kasus : PLTGU Tenggarong) diharapkan dapat membantu sebuah sistem yang bersifat manual menjadi sebuah sistem terkomputerisasi. Mikrokontroler dengan relay board dapat menciptakan sebuah sistem untuk mengatur suatu alat listrik berupa pompa air dan lampu dengan sensor sederhana dengan inputan 0 dan 1. Pembuatan aplikasi controling dan monitoring alat bantu (Light Center, Condesate Tank and Pump Studi Kasus PLTGU Tenggarong) menggunakan bahasa pemograman Visual Basic dengan fungsi module untuk membaca pararel port dengan relay on board dengan bantuan sensor sederhana. Pembuatan ini dapat membantu kerja di dalam proses controling dan monitoring agar lebih efisien dan efektif. Uji sistem yang dilakukan menunjukkan bahwa aplikasi memiliki jumlah minimal terhadap kesalahan (error).
References
. Andi 2001. Tip & Trik Pemrograman Visual Basic 6.0 Yogyakarta.
. Andi, 2005. Panduan Aplikasi Pemrograman database dengan Visual Basic 6.0 dan Crystal Raport. Yogyakarta: Nadium.
. Artanto, Dian , S.T., M.Eng. (2007). Diklat kuliah Algoritma Pemrograman. Yogyakarta: FST-USD
. Efvy Zanidra Zam. (2002). Mudah Menguasai Elektronika. Surabaya: Indah
. Feri Andang. (2007). Box Packaging Controller Menggunakan Mikrokontroller AT89S51. Yogyakarta: Universita Negeri Yogyakarta.
. Heri Andriyanto. (2008). Pemrograman Mikrokontroler AVR ATMega16. Bandung: Informatika
. Jogiyanto.2005. Analisis dan Desain Sistem informasi : pendekatan terstruktur teori dan praktik aplikasi bisnis.Yogyakarta : ANDI Yogyakarta.
. Kadir, 1999. Konsep dan Tuntutan Praktis Basis Data. Yogyakarta: Andi Yogyakarta.
. Kristanto, 1993, 1994. Konsep dan Perancangan Database. Yogyakarta: Andi Yogyakarta.
. Madcoms. 2001. Seri Panduan Pemrograman Microsoft Visual Basic 6.0. Yogyakarta: Andi Yogyakarta.
. Pamungkas. 2000. Tip dan Trik Microsoft Visual Basic 6.0. Jakarta: PT Elex Media Komputindo.
. Pedoman Umum Penulisan Skripsi. 2005. Fakultas Matematika dan Ilmu Pengetahuan Alam.
. Produksi elektronik. 2013. cara-prinsip-kerja-relay-fungsi-simbol-relay.
. Simarmata, Janner. 2010. “Rekasa Perangkat Lunak”. Yogyakarta: C.V Andi Offset
. Sunomo. (1996). Elektronika II. Universita Negeri Yogyakarta.
. Turban, Efraim.1995. Decision support Systems and Intelligent Systems. United States of America: Prentice – Hall International, Inc.
. Sunyoto. (1993). Mesin Listrik Arus Searah. Yogyakarta: Universita Negeri Yogyakarta
Downloads
Published
Issue
Section
License
Copyright Transfer StatementThe copyright to this article is transferred to Seminar Nasional Ilmu Komputer Dan Teknologi Informasi (SAKTI) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to Seminar Nasional Ilmu Komputer Dan Teknologi Informasi (SAKTI) . The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
- This paper has not been published in the same form elsewhere.
- It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above-mentioned paper in whole to Seminar Nasional Ilmu Komputer Dan Teknologi Informasi (SAKTI) . The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
- Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
- Authors may reproduce or authorize others to reproduce the Work or derivative works for the author’s personal use or for company use, provided that the source and the JIM copyright notice are indicated, the copies are not used in any way that implies Seminar Nasional Ilmu Komputer Dan Teknologi Informasi (SAKTI) endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
- Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
JIM by http://e-journals.unmul.ac.id/index.php/SAKTI/index is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
