RANCANG BANGUN MESIN PELET BIOMASSA TERINTEGRASI DENGAN PENDEKATAN DIAGRAM FAST

Gusti Hardiansyah, Ivan Sujana, Ratih Rahmahwati, M. Taufiqurrahman

Abstract


The purpose of this research is to support and encourage the development of sustainable palm oil, reduce the environmental impact caused by the rehabilitation of oil palm plants that are not well managed by the managers of oil palm plantations and produce technological.Therefore, in-depth analysis is needed related to the innovation of biomass pellet printing machine (biopellet) technology using the diagram function Function Analysis and System Technique (FAST). Analysis is done by determining the critical functions that must be present in an integrated biomass pellet machine (biopellet) on the performance of a machine that can produce biomass pellets (biopellet) and is moveable. The results of the study using the FAST approach produce engine design that has the main function in a biopellet machine that is moveable by considering the critical functions such as the cutting function of waste palm stalks, enumeration functions, raw material mixing functions, pellet printing functions and skeleton holder functions that can integrate all functions engine by considering the moveable nature of the engine. It is hoped that this research can be developed even better starting from the quality of the cutting edge of the blade on the machine and the printing quality of the biopellet.


Keywords


Palm Oil Waste, Biopellet Machine, Building Design, FAST Diagram

Full Text:

PDF

References


Abelloncleanenerg, 2009. Cofiring with biopellets: An efficient way to reduce greenhouse greenhouse gas emissions. s.l.:s.n.

Departemen Pertanian, 2006. Statistik Pertanian 2006. Deptan. Jakarta.

Donomartono, 1999. Aplikasi Value Engineering Guna Mengoptimalkan Biaya pada Tahap Perencanaan Konstruksi Gedung Dengan Struktur Balok Beton Pratekan, Surabaya: Institut Teknologi Sepuluh Nopember.

Hambali, E. & Rivai, M., 2017. The Potential of Palm Oil Waste Biomass in

Indonesia in 2020 and 2030. Bogor, International Conference on Biomass: Technology, Application and Sustainbale Development.

Herdiman, L., Liquiddanu, E. & Paramita, D., 2011. Perbaikan Rancangan Pada Desain Knee Ankle Foot Orthosis (KAFO) Dengan Pendekatan Metode Function Analysis System Technique. JATI Undip: Jurnal Teknik Industri, Volume Volume 6, pp. 189-198.

Hidajat, M. & Rudianto, A., 2011. Pemanfaatan Limbah Sawit Untuk Bahan Baku Bio-Pellet Sebagai Sumber Energi Terbarukan Yang Ramah Lingkungan. Jurnal Kehutanan Tropika Humida 4(1), pp. 67-79.

Kusumaningrum, W. & Munawar, S., 2014. Prospect of Bio-pellet as an Alternative Energy to Substitute Solid Fuel Based. s.l., Energy Procedia.

PFI., Pelet Fuel Institute, 2007. Pelets: Industry Specifics. http://www. peletheat.org/3/industry/IndustrySpecifics.html.

Puspitasari, H. E., Pari, D. & Gustan, 2014. Karakteristik Biopellet Campuran Cangkang dan Pelepah Kelapa Sawit (Elaeis guieensis Jacq), Bogor: IPB.

Soelaiman, 2008. Pendekatan Value Engineering untuk Optimasi Proses Pemilihan Material. Journal of Industrial Engineering and Management Systems, Volume Vol 11, pp. 35-44.

Thay Kong, G., 2010. Peran Biomassa Bagi Energi Terbarukan. Jakarta: Gramedia.

Wijaya, M. & Joniarta, I., 2012. Aplikasi Rekayasa Nilai (Value Engineering) Pada Desain Tungku Briket Arang Biomassa. Dinamika Teknik Mesin, Volume 2 No 2(ISSN: 2088-088X), pp. 116-121.

Windarwati, 2011. Uji Kinerja Rotary Dryer Berdasarkan Efisiensi Termal Pengeringan Serbuk Kayu Untuk Pembuatan Biopelet. Jurnal Teknik Kimia , Volume No.2 April.




DOI: http://dx.doi.org/10.35941/ujht.v4i1.3603

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Gusti Hardiansyah, Ivan Sujana, Ratih Rahmahwati, M. Taufiqurrahman

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Ulin : Jurnal Hutan Tropis

Forestry Faculty of Mulawarman University

Jl. Penajam Kampus Gunung Kelua PO. Box 1013 Samarinda 75116

E-Mail: ulin.jhuttrop@fahutan.unmul.ac.id

Support Contact

Yasfini Hurum Mercury
Phone: 0821-5815-1527
Email: ulin.jhuttrop@gmail.com

Description: Description: UJHT Visitors Stats Description: Creative Commons License
ULIN: Jurnal Hutan Tropis by http://e-journals.unmul.ac.id/index.php/UJHT/ eISSN: 2599-1183 is licensed under a Creative Commons Attribution-ShareAlike 4.0 International